Settings - Value For Output Format Scene; Settings - Blocking Object; Behaviour At Removing The Blockage - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

11.5.38 Settings — Value for output format scene
Options:
The parameter defines which value should be sent after the threshold value is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Scene".

11.5.39 Settings - blocking object

Options:
The complete function of the CO2 sensor can be switched active or inactive using this
parameter and the corresponding communication object.

11.5.40 Behaviour at removing the blockage

Options:
If the sensor is enabled again after the receipt of an OFF telegram, the following parameters
can be selected:
Do not send:
■
– The sensor only sends its value when it has changed.
Send current value:
■
– The sensor sends its current value also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
Product manual 2CKA001473B9679
Description of application and parameters
0-64
Inactive
Active
Do not send any message
Send current value
Application "CO2 sensor"
│169