Co2 - Threshold 1; Co2 - Threshold 2; Co2 - Threshold 3; Co2 - Co2 Setpoint - ABB ClimaECO SBS/Ux.0.1 Series Product Manual

12.1.77 CO2 - threshold 1

Name
CO2: Threshold 1
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.

12.1.78 CO2 - Threshold 2

Name
CO2: Threshold 2
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.

12.1.79 CO2 - Threshold 3

Name
CO2: Threshold 3
The value sent via the object is parameterized in the application. This parameterized value is
sent to the KNX bus after the threshold is exceeded.

12.1.80 CO2 - CO2 setpoint

Name
CO2: CO2 setpoint
Another basic set value can be specified for the device via the object.
Once a new value has been received, this acts as the new reference point and therefore has a
direct impact on the measuring results of the device.

12.1.81 CO2 - Block output

Name
CO2: Block output
When the value "1" is received, all the KNX communication of the CO2 sensor is blocked and is
no longer part of KNX bus communication. Unblocking happens when the value "0" is received.
Product manual 2CKA001473B9679
Object function
Output
Object function
Output
Object function
Output
Object function
Output
Object function
Input
Communication objects
Communication objects
Data type
5.001 Percent
(0..100%)
Data type
5.001 Percent
(0..100%)
Data type
5.001 Percent
(0..100%)
Data type
9.* 2-byte floating point value
Data type
1.001 Switching
│359