Table of Contents
Advertisement
11.6.61 Dew point alarm — Send dew point alarm cyclic
Options:
If the current alarm should be sent cyclically through the corresponding KNX communication
object, the corresponding time must be selected here.
11.6.62 Dew point alarm — Telegram type for dew point alarm
Options:
This parameter defines the output value when the dew point alarm is present.
11.6.63 Dew point alarm — Switch command for dew point alarm
Options:
The parameter defines which state should be sent in case of a dew point alarm.
Product manual 2CKA001473B9679
Description of application and parameters
Inactive
Every minute
Every 2 minutes
Every 3 minutes
Every 4 minutes
Every 5 minutes
Every 10 minutes
Every 15 minutes
Every 20 minutes
Every 45 minutes
Every hour
Every 2 hours
Every 3 hours
Every 4 hours
Every 5 hours
Every 6 hours
Every 12 hours
Once a day
Switch command
Priority
Percent
Byte
Scene
Off
On
"Relative humidity" application
│204
Advertisement
Table of Contents
