Table of Contents
Advertisement
11.6.51 Behaviour at removing the blockage
Options:
If the sensor is enabled again after the receipt of an OFF telegram, the following parameters
can be selected:
Do not send:
■
–
The sensor only sends its value when it has changed.
Send current value:
■
–
The sensor sends its current value also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.6.52 Behaviour at setting the blockage
Options:
If the sensor is blocked after the receipt of an ON telegram, the following parameters can be
selected:
Do not send:
■
–
The sensor sends no value during blockage.
Send current value:
■
–
The sensor sends its current value during blockage also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
11.6.53 PI controller - Value at blockage
Options:
Fixes the status for activating the blockage.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
Product manual 2CKA001473B9679
Description of application and parameters
Do not send any message
Send current value
Send nothing
Send value
0 - 255
"Relative humidity" application
│200
Advertisement
Table of Contents
