Table of Contents
Advertisement
Notice
This parameter is only available if the "Device function" parameter is set on
either "Single device" or "Master device" and the "Control value type" parameter
is set on "Fan coil".
11.4.1
Fan coil settings - Number of fan devices
Options:
If fan coil devices have been set for heating and cooling, this parameter is used to set whether
heating or cooling operation is carried out via the same device with fan control, or via two
separate deices with separate fan activation.
11.4.1
Fan coil settings – Fan speed level data formats for Master-Slave
Options:
Here, for master-slave operation of operating units, it is set whether the setting of the manual
fan speed level between master and slave device is carried out as counter value or percentage
value. Master and slave devices must be set the same for the correct function.
Product manual 2CKA001473B9679
Description of application and parameters
Heating/cooling via one system
Heating/cooling via two systems
Counter values (e.g. 0 - 5)
Percentage values
Application "RTC"
│141
Advertisement
Table of Contents
