Table of Contents
Advertisement
Customizing the Analyzer Software
only to administrators, as Figure 5-33 shows. Follow the instructions below to set the ranges.
Figure 5-33 Reference range screen
Selecting patient group
Follow the steps given below to select the patient group you want.
1. At the "Settings" screen, press [F1] to select the "Ref. Range" group.
2. SELECT the combo box to the right of "Group".
Figure 5-34 Selecting patient group
3. SELECT "General", "Man", "Woman", "Child" or "Neonate" from the "Group"
pull-down list.
5-21
Advertisement
Table of Contents
