Table of Contents
Advertisement
Exiting "Gain" group
When you have finished changing all the desired gain settings, you may
1. Press [F1] to select another setting group you want to change; or;
2. Press [MENU] and a message box will pop up to remind you to save the changes, as
Figure 5-28 shows. CLICK "Yes" to save the changes and exit to the system menu; or
CLICK "No" to exit to the system menu without saving the changes.
5.3.5 Count
You can select the "Count" group to view or change (if you have the administrator password)
the parameter units and count time.
Customizing the Analyzer Software
Figure 5-27 Setting HGB gain
Figure 5-28 Saving changes
5-16
Advertisement
Table of Contents
