Table of Contents
Advertisement
The waste container is full.
Waste full
Something is wrong with the
File error
analyzer's file system.
Something is wrong with the
Dynamic
analyzer's memory.
memory error
+12 V power
Something is wrong with the
error
power board.
-12 V power
Something is wrong with the
error
power board.
56V power error
Something is wrong with the
power board.
Troubleshooting Your Analyzer
2. If not, change a new container of rinse
Empty the waste container and reset
usable volume of the waste container as
instructed by Chapter 5.3.1.
Turn off the power and contact Mindray
customer service department or your local
distributor.
Turn off the power and contact Mindray
customer service department or your local
distributor.
Shut down the analyzer and contact
Mindray customer service department or
your local distributor.
Shut down the analyzer and contact
Mindray customer service department or
your local distributor.
Shut down the analyzer and contact
Mindray customer service department or
your local distributor.
11-11
Reagents" and adjust the remaining
diluent volume as instructed by
Chapter 5.3.1;
as instructed by Chapter 4.4.1.
Advertisement
Table of Contents
