Table of Contents
Advertisement
Troubleshooting Your Analyzer for solutions;
4. Run the controls;
5. Check if the analyzer needs to be calibrated.
Browsing X-B analysis results
Press [↑] or [↓] to review the preceding or following screen; press [PgUp] or [PgDn] to review
the preceding or following result. The parameter value of the current point (the one the cursor
is located at) is displayed below the parameter. The location of the current point is displayed
in the "No." field. The analysis time is displayed in the "Time" field.
Printing X-B graphs
Press [PRINT] to print out the displayed X-B graphs.
Exiting the "X-B Graph" screen
Press [MENU] to exit to the system menu,.
Using the QC Programs
8-20
Advertisement
Table of Contents
