Table of Contents
Advertisement
The System Time area displays the system time.
Sample Information Area
The Sample Information area has two sub-areas, the upper titled "Current sample" and the
lower "Next sample".
The "Current sample" refers to the sample, whose analysis result is displayed on the
"Count" screen. Its sample ID, time of analysis, analysis mode and patient information (name,
gender, age), are respectively displayed in the fields of the "Current sample" area.
The "Next Sample" refers to the sample to be analyzed next. Its sample ID and analysis
mode are displayed in the "Next sample" area.
Analysis Result Area
The Analysis Result area displays the analysis result, including histograms, of the current
sample.
Error Message Area
The Error Message area displays error messages one by one, alternating every two
seconds.
Reagent Status Area
The Reagents Status area displays how many counts the remaining reagents are enough for.
Note that when it displays "99 counts", it indicates the reagents are enough for over 99
counts and there is also enough space left in the waste container for the counts; when it
displays "0 counts", it indicates either at least one of the reagents is insufficient or the waste
container is full.
Menu Area
When you press [MENU], this area displays the system menu.
Help Area
The Help area reminds you how to proceed to the next step.
2.4.2 Screen saver
This analyzer will enter the screen saver if it has been idle at the "Count" screen for 10
minutes. When it happens, the sample probe will retract into the analyzer, the LCD will turn
dark and the power indicator will be flickering. You can press any key to resume the display
and reposition the sample probe.
Understanding Your Analyzer
2-10
Advertisement
Table of Contents
