Table of Contents
Advertisement
Appendices
E.4
Transmission
E.4.1 Defining Transmission Settings
The data format is fixed for the transmission so that every byte to be transmitted has 8 data
bits and 1 stop bit. Enter "Setup → Settings→ Print & comm." screen and edit the
communication settings as instructed by Chapter 5.3.2.
E.4.2 Transmission at "Count" Screen
If the auto transmission function is on, once the analysis is done, the analyzer will
automatically transmit the results to the external computer. If the auto transmission function is
off, you can only transmit the results manually at the "Review "screen.
E.4.3 Transmission at the "Review" Screen
Select the results you want to transmit and transmit them to the external computer as
instructed by Chapter 7.2.2. and Chapter 7.3.2.
E.4.4 Transmission at the "QC Table" Screen
Transmit the results as instructed by Chapter 8.2.3..
E-11
Advertisement
Table of Contents
