Table of Contents
Advertisement
The open-vial expiration date is calculated as follows: the date that vial is
opened + the open-vial stability days.
At the "QC Edit" screen, if you want to correct an erroneous entry, MODIFY
the wrong digit.
Deleting settings
Press [DEL] to delete all the settings.
Printing settings
Press [PRINT to print out all the settings.
Exiting the "QC Edit" screen
Press [MENU] to exit to the system menu. A message box shown in Figure 8-7 will pop up, if:
1. There is a parameter for which you have entered only the expected result or the limit; or
2. There is a parameter whose expected result is less than or equal to the limit.
CLICK "Yes" to close the box and clear the erroneous entries. Re-enter the correct values
before trying to exit the screen again. The settings can be saved only when both the expected
result and limit are valid.
If all the entries are correct, a message box will pop up to remind you to save the changes, as
Figure 8-8 shows. CLICK "Yes" to save the changes and exit to the "Controls" screen;
CLICK "No" to abort the changes and exit to the "Controls" screen.
Using the QC Programs
Figure 8-7 invalid input
8-5
Advertisement
Table of Contents
