Table of Contents
Advertisement
Entering the bed number
ENTER the number of the patient's bed into the "Bed No." box .
Entering the department name
You can either directly ENTER the name of the department, from which the sample came,
into the "Dept" box or SELECT the desired department from the "Dept" pull-down list (if
there are previously saved departments in the list).
Entering the names of the sender, tester and checker
To enter the name of the person who sent the sample for analysis, enter the name into the
"Sender" box or SELECT the desired name from the "Sender" pull-down list (if there are
previously saved names in the list ) ; to enter the name of the person who is to run (or has run)
the sample, enter the name into the "Tester" box or SELECT the desired name from the
"Tester" pull-down list (if there are previously saved names in the list ) ; to enter the name of
the person who is to review the sample results, enter the name into the "Reviewer" box, or
SELECT the desired name from the "Checker" pull-down list (if there are previously saved
names in the list ) . All the three pull-down lists are capable of saving 30 entered names.
"Yes" button
When you have finished entering all the desired sample information, CLICK the "Yes" button
to save the changes and return to exit the edit window.
"No" button
If you do not want to save the entered information, CLICK the "No" button to return to exit the
edit window.
Adjusting histograms
If you are not satisfied with the obtained histograms, you can adjust them manually after you
have entered the administrator password.
The first three discriminators of the WBC histogram are adjustable. Note that if the WBC
result is less than 0.5 or non-numeric (***), the WBC histogram is not adjustable.
The first two discriminators of the RBC histogram are adjustable. Note that if the RBC result
is less than 0.2 or non-numeric (***), the RBC histogram is not adjustable.
The first two discriminators of the PLT histogram are adjustable. Note that if the PLT result is
less than 10 or non-numeric (***), the PLT histogram is not adjustable.
For example, to move the third discriminator of the following WBC histogram, follow the
procedure below to do so.
Reviewing Sample Results
7-5
Advertisement
Table of Contents
