Table of Contents
Advertisement
C.3
Cautions
Installation by personnel not authorized or trained by Mindray may damage
your analyzer. Do not install your analyzer without the presence of
Mindray-authorized personnel.
Do not place any container on the top of the analyzer.
Do not re-use disposable products.
Do not perform any maintenance procedures that are not described in this
chapter. Performing unauthorized maintenance procedures can damage
your analyzer.
In case of problems not specified in this manual, contact Mindray customer
service department or your local distributor for assistance.
Only Mindray-supplied parts can be used for maintenance. For any
questions, contact Mindray customer service department or your local
distributor.
Use only specified recorder paper. Otherwise, it may cause damage to the
recorder head, or the recorder may be unable to print, or poor print quality
may result.
Never pull the recorder paper with force when a recording is in process.
Otherwise, it may cause damage to the recorder.
Do not leave the recorder door open unless you install paper or remove
trouble.
Improper installation of recorder paper may jam the paper and/or result in
blank printout.
If the recorder finishes a print action, wait at least 20 minutes until the
recorder head is cooled completely and then maintain the recorder.
Do not add unnecessary force to the recorder head.
Wipe off the alcohol remaining on the recorder head in time after cleaning
the recorder head.
Make sure the alcohol volatilizes completely before using the recorder to
print.
Appendices
C-3
Advertisement
Table of Contents
