Table of Contents
Advertisement
4. After draining the tubing, follow the instructions displayed on the screen (Figure 10-32) to
put the rinse, diluent and lyse tubing into distilled water and press [ENTER] to flush this
analyzer with the distilled water;
5. When the washing is over, follow the instructions displayed on the screen to remove the
rinse, diluent and lyse tubing from the distilled water and press [ENTER] to drain the
tubing again;
6. Turn off the analyzer when the screen displays "Turn off the analyzer";
7.
Wipe this analyzer dry and wrap it up for storage.
Maintaining Your Analyzer
Figure 10-31 Draining fluidic lines
Figure 10-32 Washing the analyzer
10-22
Advertisement
Table of Contents
