Other Settings - Mindray BC-2800 Operator's Manual

5.3.8 Other Settings

You can select the "Other" group to view or change other settings.
Selecting the "Other" group
Press [F1] to select the "Other" group.
Muting beeper
This analyzer beeps when an error occurs. You can mute the beeper by pressing any key or
leave it beeping until the errors are removed. If you prefer the former, SELECT "Enabled"
from the "Any key to mute" drop-down list ; if you prefer the latter, SELECT "Disabled"
from the "Any key to mute" drop-down list. See Figure 5-41 shows.
Selecting LCD contrast
Follow the steps given below to adjust the LCD contrast.
1. SELECT "LCD contrast", as Figure 5-42 shows;
2. ENTER the desired contrast (0 to 255).
Customizing the Analyzer Software
Figure 5-41 Selecting how to mute the beeper
5-25