Table of Contents
Advertisement
Trans error
1. Communication cable not
2. Inappropriate
Barcode error
1. Poor connection between
2. Invalid bar-code.
Poor connection between the
Barcode
com
scanner and the analyzer.
error
Printer paper running out or
Printer
out
of
not properly installed.
paper
Poor connection between the
Printer offline
printer and the analyzer.
Recorder
com
1. Poor connection between
error
2. Damaged recorder.
Recorder paper running out
Recorder out of
or not properly installed.
paper
Troubleshooting Your Analyzer
well connected;
communication settings.
the scanner and the
analyzer;
the recorder and the
analyzer;
11-7
Mindray customer service department
or your local distributor.
1. Check if the communication cable is
well connected;
2. Check the communication settings as
instructed by Chapter 5.3.2 and make
sure they are the same with the host.
1. Check if the analyzer is well connected
to the analyzer;
2. Check if the bar-code is valid;
3. If the problem remains, contact
Mindray customer service department
or your local distributor.
1. Check if the analyzer is well connected
to the analyzer;
2. If the problem remains, contact
Mindray customer service department
or your local distributor.
1. Check if there is printer paper;
2. Check if the printer paper is well
installed.
Check if the printer is well connected to the
analyzer.
1. Print again;
2. If the problem remains, shut down the
analyzer and restart it again, and then
print again;
3. If the problem remains, shut down the
analyzer
and
customer service department.
1. Check if the recorder paper has run
out. If so, install the paper as
instructed by Chapter 4.4.2;
2. Check if the recorder paper is properly
installed. If not, re-install the paper as
instructed by Chapter 4.4.2;
3. If the problem remains, contact
Mindray customer service department
or your local distributor.
contact
Mindray
Advertisement
Table of Contents
