Table of Contents
Advertisement
C.2 Warnings
It is important for the hospital or organization that employs this equipment
to carry out a reasonable service/maintenance plan. Neglect of this may
result in machine breakdown or injury to human health.
Operate the analyzer under the condition specified in this manual;
otherwise, the analyzer will not work normally and the analysis results will
be unreliable, which would damage the analyzer components and cause
personal injury.
Make sure the analyzer is properly grounded.
Before turning on the analyzer, make sure the input voltage meets the above
requirements.
When moving the analyzer, face the front of the analyzer and carry it from
the bottom with hands!
The reagents are irritating to eyes, skin and diaphragm. Wear proper
personal protective equipment (e.g. gloves, lab coat, etc.) and follow safe
laboratory procedures when handling them in the laboratory.
If the reagents accidentally spill on your skin, wash them off with plenty of
water and if necessary, go see a doctor; if the reagents accidentally spill into
your eyes, wash them off with plenty of water and immediately go see a
doctor.
Do not place the analyzer in a flammable or explosive environment.
Dispose of reagents, waste, samples, consumables, etc. according to
government regulations.
Avoid direct contact with blood samples.
The sample probe tip is sharp and may contain biohazardous materials.
Exercise caution to avoid contact with the probe when working around it.
To avoid personal injury, keep your clothes, hair and hands away from such
moving parts as the sample probe.
Only install a fuse of the specified type and rating.
Unless otherwise instructed, always turn off the power before trying to fix
the error.
Wear proper personal protective equipment (e.g. medical gloves, disposable
wrist strap, etc.) against the static electricity during maintaining recorder.
Make sure the power supply of the analyzer has been cut off before
maintenance.
Appendices
C-2
Advertisement
Table of Contents
