Suzuki Ignis Service Manual page 278

4B-4 PROPELLER SHAFTS
Propeller shaft bolt
Center support bolt
INSTALLATION
TIGHTENING TORQUE SPECIFICATION
Fastening portion
1) Reverse removal procedure to install propeller shaft noting
following point.
• When installing propeller shaft, align the match marks (1).
Otherwise, vibration may occur during driving.
• Use following specification to torque bolts.
Tightening torque
Propeller shaft bolt (a) : 23 N·m (2.3 kg-m, 17.0 Ib-ft)
Center support bolt (b) : 50 N·m (5.0 kg-m, 36.5 lb-ft)
2. Propeller shaft No.2
3. Propeller shaft center support
4. Propeller shaft No.1
N•m
Tightening torque
kg-m
23 2.3
50 5.0
lb-ft
17.0
36.5