Stabilizer Bar And/Or Bushings - Suzuki Ignis Service Manual

STABILIZER BAR AND/OR BUSHINGS

1. Stabilizer bar
2. Mount bracket
3. Mount bushing
4. Bushing 7. Stabilizer bar mounting bracket bolt
5. Washer 8. Sprit pin
6. Stabilizer bar nut
REMOVAL
1) Hoist vehicle and allow front suspension control arms to
2) Remove front wheels.
3) Remove, stabilizer bar sprit pin (3) and nut (1) and washer
4) Remove stabilizer bar mounting bracket bolts (1).
5) Remove stabilizer bar (2).
NOTE:
If it is hard to remove stabilizer bar, set tires in contact
with ground (with suspension compressed).
hang free.
(2).
F. FORWARD
FRONT SUSPENSION 3D-9
Tightening torque
Do not reuse.