HEATER AND AIR CONDITIONING 1A-30
5. Remove actuator from bracket.
Installation
1. Attach actuator to bracket.
2. Connect actuator rod to link and install pin.
3. Mount the bracket to the kick panel.
4. Connect the valve return spring. Connect the vacuum
hose to the actuator.
KICK PANEL AIR VALVE
Removal
1. Remove actuator mounting bracket from kick panel.
.
2
Remove valve return spring.
3.
Pull the top pivot pin downward against spring tension
until it clears the upper pivot hole. Pull valve in
ward and withdraw lower pivot from pivot hole.
Remove the valve from the actuator link.
4.
Installation
1. Attach the valve to the actuator link.
2. Insert the lower pivot pin into the lower hole, retract
Fig. 42 - Vacuum Harness
PLENUM V A LV E
Fig. 43 - A ir Inlet V a lv e and Recirculating
A ir V a lv e
CHEVROLET TRUCK SERVICE M ANUAL
KICK PAD
VALVE