Chevrolet 30 Series 1967 Service Manual page 134

FRONT SUSPENSION 3-6
-4 -3 -2 -1 0 +1 +2
CASTER AND CAMBER DEGREES
Fig . 9 - Caster-Cam ber Chart - 10-30 Series
F ig . 10 - Caster-Cam ber Shims - 10-30 Series
Fig . 8 - Caster-Cam ber Adjustment - 10-30 Series
+3 +4 +5 +7
+6 + 8
Fig. 11 - Caster Shims - I-Beam
Fig. 12 - Tilting Tie Rod Sockets
gear high point adjustment and place wheels in straight
ahead position before checking toe-in. Adjustments are
made by loosening clamp bolts at each end of tie rod,
then turning tie rod tube until wheels have proper toe-in.
Tighten clamp bolts securely after proper adjustment is
made. After toe-in adjustment on 4000, 5000 and 7000
CHEVROLET TRUCK SERVICE MANUAL