. Loosen the adjustment swivel at the mast jacket, and
8
rotate the transmission lever so that it contacts the
drive stop in the steering column.
9. Tighten the swivel and recheck the adjustment. See
Steps 2 and
.
6
10. Readjust indicator needle if necessary to agree with
the transmission detent positions. See Section 9.
11. Readjust neutral safety switch if necessary to pro
vide the correct relationship to the transmission
detent positions. See Section 12.
12. When properly adjusted the following conditions must
VIEW A
Fig . 3T - Lower Control Linkage (PS20)
CLUTCHES AND TRANSMISSIONS 7-47
be met by manual operation of the steering column
shift lever:
a. From reverse to drive position travel, the trans
mission detent feel must be noted and related to
indicated position on dial.
b. When in drive and reverse positions, pull lever
rearward (towards steering wheel) and then re
lease. It must drop back into position with no
restrictions.
VIEW B
CHEVROLET TRUCK SERVICE M ANUAL