3. Remove bolt from transmission output shaft and
pull drum and flange assembly off end of shaft.
CAUTION:
Do not hammer or pry on drum
during removal.
4. Remove four nuts, lock washers, and bolts attaching
oil deflector to inner side of brake drum.
5. P ress four serrated bolts from flange and drum
assembly to separate drum from flange.
V IE W B
V I E W A ^
PA20-30
Fig. 62—Parking Brake System—P10-20-30 Series
Brake Drum
Installation
1. Wipe clean mating surfaces of brake drum and output
2. Position oil deflector in brake drum and attach with
V IE W A
V IE W B
PA209-213-309-313
shaft flange. Lineup brake drum and flange and press
four serrated bolts into place.
four bolts, lock washers, and nuts. Tighten nuts to
5-8 foot-pounds torque.
BRAKES 5-37
V IE W C
NV IE W B
PA215-315
#
CHEVROLET TRUCK SERVICE M ANUAL