Chevrolet 30 Series 1967 Service Manual page 573

Fig. 11 - Radiator Mounting - ME60 Models
ME 60 MODELS (Fig. 11)
Radiator replacement for these trucks is the same as
outlined above for ME—MS 50 models.
MS 50 radiator replacement procedure. The only differ­
ence is in the radiator support area as illustrated by a
comparison of Figures
8
are equipped with fan shrouds.
TA MODELS (Figs. 12, 13f and 14)
Radiator and Shroud Replacement
NOTE: TT 40, TD 50-60, and TG 50-60 are
equipped with the extended fan shroud shown in
Figure 12. All other T models are equipped
with the shroud shown in Figure 13.
12 -
Fig . Fan Shroud Mounting - TT
and T G
Refer to ME—
and 11; also, no ME 60 models
40, 50-60
TD
50-60
Models
Fig. 13 - Fan Shroud Mounting - TS40-50-60 and
TE40-50-60 Models
1. Drain cooling system and disconnect radiator hoses
and transmission coolant line if so equipped.
2. Remove fan shroud attaching screws and carefully
hang shroud over fan assembly to provide clearance
for radiator removal.
Remove cotter pin and attaching hardware from
3.
lower mount.
4. Remove bolts, one on each side, and attaching hard­
ware from upper mounts.
RADIATOR AND GRILLE 13-5
CHEVROLET TRUCK SERVICE M ANUAL