Chevrolet 30 Series 1967 Service Manual page 494

CHASSIS SHEET METAL I T -8
Fig. 8A - Front End Sheet M etal Mounting
(Crossmember to G r ille and Support)
7. Starting in center, loosely attach
grille filler panel to radiator support.
. Place right fender in position and loosely install
8
bolts and shims at fender top to cowl.
9. Attach grille upper to right fender bolts loosely.
10. Attach bolts from inside of grille lower to right
fender lower (limited access between radiator sup­
port outer face and grille inner face).
11. Install radiator support to fender.
12. Using drift line up right fender skirt rearmost bot­
tom screw with fender flange and attach loosely.
13. Attach right fender skirt inner top bolts to fender
underside.
F ig . 9 - Fender to Cowl 40 to 60 Series
screws through
6
14. Install screw from underside of skirt to center of
15. Tighten rearmost bottom screw of fender skirt
16. Install snugly remainder of skirt to right fender
Fig. 10 - Fender Gusset to Cow! Attachment
\
fender flange.
previously installed loosely.
screws.
CHEVROLET TRUCK SERVICE MANUAL