Chevrolet 30 Series 1967 Service Manual page 570

RADIATOR AND GRILLE 13-2
CA10-20-30, KAOO
Fig . 2 - Radiator Mounting - P10 Models
GE MODELS (Fig. 4 and 5)
Radiator Replacement
1. Raise vehicle and place on jack stands.
2. Remove bolts attaching air deflector to radiator
support, frame, and body and remove air deflector.
(Refer to Figure 4.)
3. Remove bolts attaching left and right splash shields
to frame and remove splash shields.
Figure 4.)
4. Drain radiator and disconnect radiator hoses and
transmission coolant line if so equipped.
5. Remove lower shroud screws.
Fig. 1 - Radiator and Shroud Mounting - C and K Models
(Refer to
CE KE10-20, CE30
Fig. 3 - Radiator and Shroud Mounting P20 and P30 Models
. Remove bolts securing radiator support to frame and
6
lower radiator and support from vehicle.
7. Remove screws securing shroud to upper radiator
support and remove shroud from vehicle.
. Install radiator and shroud following the removal
8
procedure in reverse order. Connect radiator hoses
and transmission coolant line, fill cooling system,
and check for leaks. If no leaks are present, install
air deflector and splash shields.
GS MODELS (Fig. 6)
Radiator Replacement
1. Raise vehicle and place on jack stands.
CHEVROLET TRUCK SERVICE M ANUAL