Chevrolet 30 Series 1967 Service Manual page 212

REAR SUSPENSION AND DRIVE LINE 4-54
1. Front Propeller Shaft and Bearing
Support Assy.
2. Front Intermediate Propeller Shaft and
Bearing Support Assy.
3. Rear Intermediate Shaft and Bearing
Support Assy.
4. Rear Propeller Shaft and Sleeve Assy.
5. Frame Cross-member
6. Guard
7 . " U " Clamp
Intermediate or Rear Intermediate
Remove the front trunnion "U" clamps and the bearing
support mounting bolt nuts and lockwashers.
front of the shaft and pull forward to disengage splines at
rear of shaft. Remove shaft and bearing support assem­
bly from under vehicle.
Fig. 98 - Propeller Shafts, Universal Jo in ts and Bearing Supports
8. Rear Propeller Shaft
9. Lock Ring
10. Bearing Assembly
11. Lubrication Fitting
12. Plug
13. Sleeve
14. Retainer
15. Washer
16. Cork Packing
Lower the
17. Trunnion
18. Seal Ring
19. Flange and D eflecto r Assy.
20.
21. Cushion
22. S linger
23. G rease Retainer
24.
25.
Front Intermediate
Remove the front and rear trunnion "U" clamps and the
bearing support mounting bolt nuts and lockwashers.
Lower shaft and bearing support assembly from vehicle.
Bracket
Inner Deflector
Dust Shield
CHEVROLET TRUCK SERVICE MANUAL