Network-Specific Led Indicators Cpx-Fb36 - Festo MSE6-E2M Original Instructions Manual

8 Diagnostics and error handling
8.2.4

Network-specific LED indicators CPX-FB36

[MS] – Module Status
LED Sequence
(green/red)
EtherNet/IP network protocol
ON
OFF
lights up
green
ON
OFF
flashes green
ON
OFF
lights up red
ON
OFF
Flashes red
ON
OFF
flashes
alternately
red/green
ON
OFF
off
Modbus TCP network protocol
ON
OFF
lights up
green
ON
OFF
off
1) The behaviour of the LED indicator is dependent on the network protocol used.
Tab. 8.10 LED indicator [MS] – Module Status
Festo – MSE6-E2M-SY-EN – 1703d – English
1)
Significance
Normal operating status
Configuration not complete or not
correct
Error cannot be rectified
Fault can be rectified
Self-test is carried out
No logic power supply of network
interface
Ready for Modbus connections
Not ready for Modbus connec­
tions
Remedy
–
• Complete or correct the con­
figuration.
• Contact Festo repair service
(è www.festo.com).
• Check the configuration.
–
• Check logic supply.
–
–
89