1
Safety and requirements for product use
1.2.2
Qualification of specialized personnel
The product may only be placed in operation by qualified personnel with knowledge of and experience
with electrical and pneumatic control technology.
1.2.3
Range of applications and certifications
Standards and test values, which the product must comply with and fulfil, can be found in the section
"Technical data" of the commissioning description (è MSE6-E2M-IN-...). The product-relevant EU dir
ectives can be found in the declaration of conformity.
Certificates and the declaration of conformity for this product can be found in Festo's Sup
port Portal (è www.festo.com/sp).
The product fulfils the requirements of EU directives and is marked with the CE marking.
Festo – MSE6-E2M-SY-EN – 1703d – English
9