System Parameters; C.2 System Parameters - Festo MSE6-E2M Original Instructions Manual

C Parameters and data
C.2

System parameters

The system parameters refer to global functions of the MSE6-E2M.
The following system parameters are available:
Function no. System parameters
4400 Reserved
4401 Monitoring (active/inactive)
4402 Fail safe (behaviour on communication faults)
4402 Force mode (enable/block Force)
4402 System start
4402 Analogue process value representation (data format)
1) Only relevant for certain network protocols (è Description of bus node)
Tab. C.3 Overview – System parameters
[........] The data and parameters displayed in English on the operator unit are shown in square
brackets in the text of this description, e.g. [Limits]. To the left of this is the translation, e.g.:
Limit values
Festo – MSE6-E2M-SY-EN – 1703d – English
[Limits]
1)
117