Festo MSE6-E2M Original Instructions Manual page 26

4 Commissioning
Setting the station number and diagnostic mode (DIL switch 3)
Station numbers may only be assigned once per controller.
Recommendation:
• Assign station numbers in ascending order. Assign the station numbers in accordance
with the machine structure of the system.
Setting DIL switch 3
DIL 3.8
DIL 3.7
DIL 3.6
DIL 3.5
DIL 3.4
DIL 3.3
DIL 3.2
DIL 3.1
1) If device-related diagnostics are deactivated, then no device-related diagnostic information about the MSE6-E2M will be sent to
the master system.
Tab. 4.6 Setting the station number and diagnostic mode (DIL switch 3)
Example for setting station number 23 and activating device-related diagnostics
DIL 3.8: ON
DIL 3.7: OFF
DIL 3.6: OFF
DIL 3.5: ON
DIL 3.4: OFF
DIL 3.3: ON
DIL 3.2: ON
DIL 3.1: ON
Tab. 4.7 Setting the station number and diagnostic mode (example)
26
Setting the station number and diagnostic mode
Device-specific diagnostics
ON = activated (factory setting)
OFF = deactivated
Station number
The station number of the MSE6-E2M is set binary coded using
DIL switches 3.1 ... 3.7.
Permissible station numbers: 1 ... 125
Factory setting: 3
Example: è Tab. 4.7
– Device-related diagnosis activated.
6
2 = 64 Example:
0 1
5
2 + 2 + 2
2 = 32
4
2 = 16
è Station number set = 23
3
2 = 8
2
2 = 4
1
2 = 2
0
2 = 1
2 4
+ 2 = 1 + 2 + 4 + 16 = 23
Festo – MSE6-E2M-SY-EN – 1703d – English