Festo MSE6-E2M Original Instructions Manual page 25

4 Commissioning
Setting the operating mode (DIL switch 1)
The MSE6-E2M with bus node CPX-FB13 only supports the operating mode Remote I/O
(factory setting).
All switch elements of the DIL switch 1 must be in the OFF position.
Setting of DIL switch 1
DIL 1.1: OFF
DIL 1.2: OFF
(Factory setting)
DIL 1.1: ON
DIL 1.2: OFF
DIL 1.1: OFF
DIL 1.2: ON
DIL 1.1: ON
DIL 1.2: ON
Tab. 4.5 Setting the operating mode with DIL switch 1
Reserved DIL switch (DIL switch 2)
All switch elements of DIL switch 2 must be in the OFF position (factory setting).
Festo – MSE6-E2M-SY-EN – 1703d – English
Setting the operating mode
Remote I/O operating mode
All the functions of the MSE6-E2M are controlled directly by
the PROFIBUS master.
Is not supported by the MSE6-E2M.
The DIL switch elements 1.1 and 1.2 must be in the OFF posi­
tion.
25