Festo MSE6-E2M Original Instructions Manual page 6

MSE6-E2M
Notes on this description
This description contains general basic information on commissioning and parameterisation of the
energy efficiency module MSE6-E2M.
Additional information concerning the mode of operation, mounting, installation and commissioning
and the chapter "Technical Data" can be found in the commissioning description of the energy effi­
ciency module (è MSE6-E2M-IN-...).
Special information on commissioning, parameterisation and diagnostics with the bus node you are
using can be found in the corresponding description for the bus node.
Overview of the descriptions è Tab. 1.
Conventions
Chapter 7 describes the parameters and data of the MSE6-E2M. These appear in English on the CPX-
MMI-1 operator unit.
[........] The data and parameters displayed in English on the operator unit are shown in square
brackets in the text of this description, e.g. [Limits]. To the left of this is the translation, e.g.:
Limit values
Service
Consult your local Festo repair service if you have technical problems.
Additional documentation è www.festo.com/sp
User documentation for the MSE6-E2M
Title
"Energy efficiency module"
MSE6-E2M-IN-...
"CPX system description:"
P.BE-CPX-SYS-...
"Bus node CPX-..."
e.g. CPX-FB13-...
"Bus node CPX-..."
e.g. P.BE-CPX-FB13-...
"Operator unit CPX-MMI-1"
P.BE-CPX-MMI-1-...
Tab. 1 Documentation for MSE6-E2M
6
[Limits]
Table of contents
Notes on the mode of operation, mounting, installation and
commissioning and the chapter "Technical data" of the energy
efficiency module.
Notes on installation and commissioning of CPX terminals.
Brief descriptions of the bus nodes e.g. CPX­FB13.
Notes on mounting, installation, commissioning and diagnostics
for the bus nodes, e.g. CPX­FB13.
Notes on commissioning and diagnostics with the operator unit
CPX-MMI-1.
Festo – MSE6-E2M-SY-EN – 1703d – English