Commissioning With Bus Node Cpx-M-Fb36; Interfaces And Display Components - Festo MSE6-E2M Operating Instruction

Commissioning
8.4

Commissioning with bus node CPX-M-FB36

This section describes the interfaces, DIL switches and display elements of the bus node mentioned
and provides an overview of the configuration and commissioning with this bus node.
For detailed information on the bus node, see the documentation on the bus account
è 1 Applicable documents.
A configuration for the energy efficiency module can be created using the software 'Festo Maintenance
Tool', CPX-FMT è 8.4.4 Commissioning and configuration.
8.4.1

Interfaces and display components

Interfaces and display components on the bus node CPX-M-FB36
Fig. 23: Interfaces and display components on
the bus node CPX-M-FB36
LED displays on the bus node CPX-M-FB36
Fig. 24: LED displays on the bus node CPX-M-
FB36
Festo — MSE6-E2M — 2022-08d
1
2
3
4
3
1 2
1
Service interface
2
Network-specific and CPX-specific LEDs
3
Network port, M12, D-coded
3
Network port, M12, D-coded
4
DIL switch, under the cover
1
Network-specific LEDs
2
CPX-specific LEDs
43