Festo MSE6-E2M Original Instructions Manual page 136

C Parameters and data
System data: Monitor
Function no. 2
Description Specifies whether the monitoring of short circuit/overload and undervoltage is
active or inactive.
Monitor
Bit Description
0 Short circuit/overload in sensor supply (SCS)
1 Short circuit/overload at the outputs (SCO)
2 Undervoltage of outputs (U
3 Reserved
4 Short circuit at the valve (SCV)
5 Reserved
6 Reserved
7 Reserved
Values 1 = Active
0 = Inactive
è also "Monitor" system parameter
Comment
Tab. C.40 Monitoring
System data: Number of input bytes (Rx size)
Function no. –
Description Specifies the number of input bytes of the MSE6-E2M.
Comment Only relevant for certain network protocols (è Description of bus node)
Tab. C.41 Number of input bytes
System data: Number of output bytes (Tx size)
Function no. –
Description Specifies the number of output bytes of the MSE6-E2M.
Comment Only relevant for certain network protocols (è Description of bus node)
Tab. C.42 Number of output bytes
136
)
OUT
Festo – MSE6-E2M-SY-EN – 1703d – English
[Monitor]
[Monitor SCS]
[Monitor SCO]
[Monitor Vout]
–
[Monitor SCV]
–
–
–