Festo MSE6-E2M Original Instructions Manual page 125

C Parameters and data
Diagnostic memory parameters: Module/channel filter
Function no. 3484
Description With this diagnostic memory filter, the recording of errors of other modules or
channels can be suppressed so that errors in a particular module or channel can
be analysed.
Bit Bit 6, 7
Values Module/channel filter
FN = Error number
Bit 7 6 Description
0 0 Module/channel filter inactive (presetting)
0 1 Record only the FN of a module
1 0 Record only the FN of a channel
1 1 Reserved
Comment The appropriate numbers are determined by means of the diagnostic memory
parameters "Module number" and "Channel number" (function nos.
3485...3486).
Tab. C.15 Module/channel filter
Diagnostic memory parameters: Module number (MN)
Function no. 3485
Description Module number for the diagnostic memory filter
Bit 0 ... 7
Values Module number (MN)
0 ... 47
Comment Is only effective if an appropriate diagnostic memory filter is active.
Tab. C.16 Module number (MN)
Diagnostic memory parameters: Channel number (CN)
Function no. 3486
Description Channel number for the diagnostic memory filter
Bit 0 ... 7
Values Channel number (CN)
0 ... 63
Comment Is only effective if an appropriate diagnostic memory filter is active.
Tab. C.17 Channel number (CN)
Festo – MSE6-E2M-SY-EN – 1703d – English
(1 byte)
Module number (0 = presetting)
(1 byte)
Channel number (0 = presetting)
[Module/channel filter]
[Inactiv]
[Rec. FN of a mod.]
[Rec, FN of a ch.]
–
[Module number MN]
[Channel number CN]
125