Festo MSE6-E2M Original Instructions Manual page 135

C Parameters and data
System data: System start
Function no. 0
Description Specifies how the system start of the MSE6-E2M is to be carried out.
Bit Bit 7
Values System start
Bit 7 Description
0 System start with default parameterisation (factory
setting) and current expansion
1 System start with saved parameterisation and saved
equipment status
è also "System start" system parameter
Comment
Tab. C.38 System start
System data: Fail safe
Function no. 1
Description Specifies whether Fail safe is active or inactive.
Bit Bit 0, 1
Values Fail safe
Bit 1 0 Description
0 0 Reset all outputs
0 1 Hold last state (retain signal status)
1 0 Assume Fault mode
Tab. C.39 Fail safe
Festo – MSE6-E2M-SY-EN – 1703d – English
[System start]
[Default parameters]
[Saved parameters]
[Fail safe]
[Reset outputs]
[Hold last state]
[Assume fault mode]
135