Pin Allocation Of The Network Interface Of The Cpx−Sf34 - Festo CPX-SF34 Manual

1. Installation
1.5.3 Pin allocation of the network interface of the CPX−SF34
RJ45 socket
Tab. 1/4: Pin allocation of the network interfaces of the CPX−SF34
Festo P.BE−CPX−SF34+SF35−E N en 1007NH
There are two push−pullRJ45 copper sockets
(AIDA−conforming) on the CPX−SF34 for the network
connection:
Pin Signal
1 TD+
2 TD
3 RD+
4
5
6 RD
7
8
Metal covering FE
Connection with plug from Festo
Connect the CPX−SF34 to the network with Festo plugs, type
FBS−RJ45−PP−GS. The plug is designed for Ethernet lines with
cable diameters of 5 ... 8 mm.
To comply with protection class IP65/IP67:
Use Festo plugs.
Seal unused interfaces (see section 1.6).
Explanation
Transmission data (Transmit Data, TD) +
Transmitted data
Receive data (Receive Data, RD) +
Reserved
Reserved
Received data
Reserved
Reserved
Screening/functional earth
(Shield/functional earth, FE)
1−15