Led Indicators - Festo CPX-E-EP Manual

2 Function
2.4.1

LED indicators

This document describes the network-specific LED indicators. The system-specific LED indicators are
described in the documentation for the system CPX-E è 1.1 Further applicable documents.
Data traffic [XF1], [XF2]
LED (green) Meaning
Network connection OK
lights up
Data traffic ongoing
1)
flashes
No network connection
off
1) Flashing frequency is dependent on the traffic.
Tab. 2.7
Module status [MS]
LED Meaning
(green, red,
orange)
Normal operating status
lights up
green
Configuration of system CPX-E not complete or
not correct.
flashes
green
Error cannot be rectified
lights up
red
Error can be rectified
flashes red
The system CPX-E is in self-test mode.
flashes
alternately
red/green
Bootloader
lights up
orange
No logic supply to the network interface.
off
Tab. 2.8
Festo – CPX-E-EP-EN – 2017-07 – English
Remedy
–
–
• Check network connection.
Remedy
–
• Complete or correct configuration of the
system CPX-E.
• Contact Festo service
è www.festo.com.
• Check configuration of system CPX-E.
–
–
• Check logic supply.
13