Festo MSE6-E2M Original Instructions Manual page 20

4 Commissioning
LED indicators on the bus node CPX-FB13
1
Network-specific LEDs
2
CPX-specific LEDs
Fig. 4.3 LED indicators on the bus node CPX-FB13
Network-specific LEDs
BF Bus error/status (red)
1) Without network connection, the LED "BF" flashes
2) In the normal operating status, all green LEDs light up; the yellow and red LEDs do not light up.
3) Parameterisation modified or Force active
Tab. 4.1 LED indicators on the bus node CPX-FB13
20
1) 2)
CPX-specific LEDs
PS Power system (green)
PM Power load (green)
ST System failure (red)
M Modify (yellow)
Festo – MSE6-E2M-SY-EN – 1703d – English
1 2
3)