Festo MSE6-E2M Original Instructions Manual page 31

4 Commissioning
Interfaces and indicators on the bus node CPX-M-FB34/35
1
5
1
Service interface
2
Network-specific and CPX-specific LED
indicators
3
1)
Memory card
1) Under a cover
Fig. 4.8 Interfaces and indicators on the bus node CPX-M-FB34/35
LED indicators on the bus node CPX-(M)-FB33/34/35
1
Network-specific LEDs
2
CPX-specific LEDs
Fig. 4.9 LED indicators on the bus node CPX-(M)-FB33/34/35
Network-specific LEDs
NF Network failure (red)
M/P Maintenance/PROFIenergy (green)
TP1 Link 1 (green)
TP2 Link 2 (green)
1) If there is no network connection, the LED "NF" flashes.
2) In the normal operating status, all green LEDs light up; the yellow and red LEDs do not light up.
3) Parameterisation modified or Force active.
Tab. 4.9 LED displays
Festo – MSE6-E2M-SY-EN – 1703d – English
1)
4 1)
DIL switches
5
Network connection
- CPX-M-FB34 (RJ45 socket)
- CPX-M-FB35 (SCRJ socket)
2)
CPX-specific LEDs
PS Power system (green)
PL Power load (green)
ST System failure (red)
M Modify (yellow)
1 2
3)
2
3
4
5
31