FujiFilm PROFECT CS Service Manual page 1248

10.
Carry out the operations in the steps 11 and 12 from the direction
indicated by the arrow in the figure below.
11.
Slightly lift the post-reading conveyor unit and flip it down forward.
u NOTE u
Exercise care not to bring the upper portion of the post-reading conveyor unit
into contact with the ceiling of the housing (shadowed portion in the figure) when
slightly lifting the post-reading conveyor unit and flipping it down forward. The
guide of the post-reading conveyor unit might possibly deform or get damaged.
011-202-08E
09.30.2009 FM5540
12.
Slightly pull out the post-reading conveyer unit for removal.
u NOTE u
Pull out the post-reading conveyer unit carefully not to allow the retaining pin at
the tip of the unit to come off from the rail in the subscanning unit. Otherwise, the
sensor around the tip might get damaged.
CR-IR 363 Service Manual
PM-47
{PM:10.4}
PM-47