1.
Mount the feed/load conveyor unit onto the housing.
u NOTE u
Use care so that the side plate bottom portions of the feed/load conveyor unit do
not ride onto the brackets of the housing.
011-202-08E
09.30.2009 FM5540
2.
Secure the feed/load conveyor unit in place.
3.
Check to ensure that the screws once removed are snugly retained.
CR-IR 363 Service Manual
PM-33
#20001 or later :
{PM:9.1}
#50001 or later :
{PM:9.1}
PM-33