Reading (Reusing) Other Format Files - Mitsubishi Electric MELSEC Q Series Handbook

7
REPLACEMENT OF PROGRAM

7.1.4 Reading (Reusing) other format files

(1) Reading (Reusing) GPPQ/GPPA files to GX Developer
The following explains how to read (appropriate) files in the GPPQ/GPPA format other than that of the
GX Developer. Follow this procedure to convert them to the file format of the GX Developer.
(a) GX Developer operation procedure
Select [Project]
(b) Setting screen
(a)
(e)
(c)
(b)
1) Drive/Path, System name, Machine name, PLC type
Designates the location of data created in GPPQ or GPPA format.
Enter the system name and machine name of the data specified in the Drive/Path.
Clicking the [Browse] button shows the dialog box for choosing the system name and machine
name. Double-click the file to be read to specify.
2) Source data list
Displays data created in GPPQ or GPPA format.
Check the checkbox of data names to be selected.
For the selected comments, the range of device comment, which can be read with the Common
tab or Local tab, are settable.
3) [Param+prog] button/[Select all] button
• [Param+prog] button
Selects only the parameter data and program data of the source data.
• [Select all] button
Selects all data in a source data list.
Comment 2 is selected for the AnS series, and the device memories of the number of data are
displayed.
The first data name is selected for comments and file registers in the Q/QnAS series.
4) [Cancel all selections] button
• Cancels all the selected data.
7
- 9
[Import file] [Import from GPPQ format file]
[Import from GPPA format file]
(h)
(g)
(f)
(d)