Printing A Sequence; In-Depth Sequencing Information - Agilent Technologies 8753ET User Manual

Printing a Sequence

1. Configure a compatible printer to the analyzer. (Refer to the "Options and Accessories"
chapter of the reference guide.)
2. To print a sequence, press:
MORE PRINT SEQUENCE
Seq
NOTE If the sequence is on a disk, load the sequence (as described in a previous
procedure) and then follow the printing sequence.

In-Depth Sequencing Information

Features That Operate Differently When Executed In a Sequence
The analyzer does not allow you to use the following keys in a sequence:
and keys
key, and
Preset
(backspace key)
Commands That Sequencing Completes Before the Next Sequence Command
Begins
The analyzer completes all operations related to the following commands before continuing
with another sequence command:
• single sweep
• number of groups
• auto scale
• marker search
• marker function
→
• data ( ) memory
• recall or save (internal or external)
• copy list values and operating parameters
• CHAN1, CHAN2, Wait 0*
*Wait 0 is the special sequencing function
and the softkey for the desired sequence.
with a zero entered for the delay value.
WAIT x
Making Measurements
Using Test Sequencing
1-91