Agilent Technologies 8753ET User Manual page 79

Network analyzers

Hide thumbs Also See for 8753ET:

Table of Contents

Making Measurements

Measuring Ampliﬁers

Making High Power Measurements with Option 014

(ES Analyzers Only)

Analyzers equipped with Option 014 can be conﬁgured to measure high power devices.

This ability is useful if the required input power for a device under test is greater than the

analyzer can provide or if the maximum output power from an ampliﬁer under test

exceeds safe input limits for a standard analyzer. This section describes three

conﬁgurations for performing high power measurements.

Figure 1-52 Internal Signal Paths of the Option 014 Analyzer