Controlling External Switches; New Seq/Modify Seq; Seq; Done Seq Modify - Agilent Technologies 8753ET User Manual

Controlling External Switches

The following are different ways to control the external switches used in the SCMM mode
of operation. The analyzer is used as the controller.
Manual
The test set I/O may be set using the following keystrokes:
TESTSET I/O FWD
Enter for external operation and
6 x1
Sequencing Program:
The test set I/O may be set using the test sequencing function in the analyzer. The
following is an example of how to setup the analyzer.
Press the following key sequence:

NEW SEQ/MODIFY SEQ

Seq

TTL I/O TTL OUT
TESTSET I/O REV
6 x1
RETURN
6 x1

DONE SEQ MODIFY

TITLE SEQUENCE
Rotate the knob on the front panel and select the following:
E SELECT LETTER
X SELECT LETTER
T SELECT LETTER
DONE RETURN
NEW SEQ/MODIFY SEQ
TESTSET I/O FWD
TESTSET I/O REV
RETURN RETURN
MORE TITLE SEQUENCE
Rotate the knob on the front panel and select the following:
S SELECT LETTER
T SELECT LETTER
D SELECT LETTER
DONE RETURN
Single Connection Multiple Measurement Configuration (Option 014 Only)
or
TESTSET I/O REV
SEQUENCE 1 SEQ1
TESTSET I/O FWD
RETURN
MORE
SEQUENCE 1 SEQ1

SEQUENCE 2 SEQ2

7 x1
7 x1
DONE SEQ MODIFY
SEQUENCE 1 SEQ1
Seq
for normal or standard operation.
7
ERASE TITLE
TTL I/O TTL OUT
ERASE TITLE
Making Measurements
TTL I/O TTL OUT
1-107