Agilent Technologies 8753ET User Manual page 152

Decrementing the Loop Counter
DECISION MAKING
SEQUENCE 2 SEQ2
Labeling the Screen
MORE
Display
Input as title: MEASUREMENT COMPLETED
DONE
DONE SEQ MODIFY
Seq
Press
NEW SEQ/MODIFY SEQ
Seq
display the following sequence commands:
SEQUENCE SEQ2
Start of Sequence
WAIT x
1 x1
MANUAL TRG ON POINT
TITLE
FREQ:CW UP
PERIPHERAL HPIB ADDR
19x1
TITLE TO PERIPHERAL
PERIPHERAL HPIB ADDR
21x1
TITLE TO PERIPHERAL
DECR LOOP COUNTER
IF LOOP COUNTER <>0 THEN DO
SEQUENCE 2
TITLE
MEASUREMENT COMPLETED
2. Press the following keys to run the sequences:
DONE SEQ MODIFY
Seq
When the prompt CONNECT MIXER appears, connect the equipment as shown in
2-22.
DECR LOOP COUNTER
TITLE ERASE TITLE
SEQUENCE 2 SEQ2
DO SEQUENCE
Making Mixer Measurements
Fixed IF Mixer Measurements
IF LOOP COUNTER<>0
and the analyzer will
SEQUENCE 2 SEQ2
Figure
2-31