Compliance With German Ftz Emissions Requirements; Compliance With German Noise Requirements - Agilent Technologies 8753ET User Manual

Safety and Regulatory Information
Safety Considerations
CAUTION This product is designed for use in Installation Category II and Pollution
Degree 2 per IEC 1010 and 664 respectively.
VENTILATION REQUIREMENTS: When installing the product in a cabinet,
CAUTION
the convection into and out of the product must not be restricted. The
ambient temperature (outside the cabinet) must be less than the maximum
operating temperature of the product by 4° C for every 100 watts dissipated
in the cabinet. If the total power dissipated in the cabinet is greater that 800
watts, then forced convection must be used.
WARNING Install the instrument according to the enclosure protection
provided. This instrument does not protect against the ingress of
water. This instrument protects against finger access to hazardous
parts within the enclosure.

Compliance with German FTZ Emissions Requirements

This network analyzer complies with German FTZ 526/527 Radiated Emissions and
Conducted Emission requirements.

Compliance with German Noise Requirements

This is to declare that this instrument is in conformance with the German Regulation on
Noise Declaration for Machines (Laermangabe nach der Maschinenlaermrerordung −3.
GSGV Deutschland).
LpA<70 dB
Operator Position
Normal Operation
per ISO 7779
8-8
Acoustic Noise Emission/Geraeuschemission
Lpa<70 dB
am Arbeitsplatz
normaler Betrieb
nach DIN 45635 t. 19